AN1774/0804 1/9 rev. 1.3 AN1774 application note str71x software development getting started introduction this document provides an introduction to the str71x product family. it describes the soft- ware environment required to develop an str7 1x application from scratch. it summarizes the different steps needed to configure the development toolset and to use the template software library to build and to debug a sample str71x application on the target hardware. two software examples are supplied with this application note. both are intended for users new to str71x microcontrollers. the first o ne is a standard application demonstrating an input/output pin toggling function. the required step s to create this example project, to build and debug the image are described in the first chapter. the second one illustrates an ad- vanced example showing the use of interrupts. both examples are loaded and executed from the str71x embedded ram, and then the target hardware has to be configured consequently (booten/1/0=?110?). the application source files ar e provided within the package ? AN1774.zip? . this file should be unpacked into any directory. this document assumes that the reader is familiar with arm cores. for more details on the arm core architecture, refer to the arm developer suite guide and the arm technical ref- erence manual. these documents are available from arm website. 1
2/9 str71x software development getting started 1 software settings this chapter describes the different steps needed to creating and configuring an str71x project. neither the toolset installation nor the licence management are described in this ap- plication note. this document assumes that the toolset is already installed on the development host. for more details on realview toolset in stallation and licences? management, refer to the realview debugger installation guide for windows. for more details on creating and running applications, refer to the realview debugger essen- tials guide. realview debugger docume nts are available from the arm website. the arm realview provides a graphical user inte rface tool for managing your software devel- opment projects. this section describes the steps required for creating, building and debugging an str71x standard application using the realview toolset. this application consists of toggling the i/o port 0 peripheral pins. the i/os, configured as push-pull outputs, are toggled in an endless loop every 130 ms (the external cl ock operates at a frequency of 16 mhz). the application source code file s are located in the example 1 of ? AN1774.zip ? file and are made of, besides the standard files described in section 2.1 , the ? main.c? file containing the main routine. 1.1 starting realview debugger to start the realview debugger: select start->programs->arm->arm realview developper kit for st from the windows start menu, select realview debugger from the menu. realview debugger starts and the default code window is displayed. this window is your de- bugging and editing window. the appearance of the code window depends on your licenses. for further information about this window contents, refer to the realview debugger essentials guide. 1.2 creating a new project the following steps describe how to create a new project. select project->new project... from the default code window main menu. a create new project dialog box is displayed (see the figure below), enter ?pintoggling? as the project name in the project name field, click the folder icon and choose
We use cookies to deliver the best possible
web experience and assist with our advertising efforts. By continuing to use
this site, you consent to the use of cookies. For more information on
cookies, please take a look at our Privacy Policy.
